The Good and Bad of Mud

When we are raising livestock, mud can be both friend and foe. When it has been dry, mud is a sign of some much needed relief. When mud seems to be a constant, it can be a hiding place for a lot of problems. Having the right amount of mud at the right time is what we would like to see. 

Mud is our friend mostly during the dry and hot times of summer. Mud is one of the most basic ways to maintain or treat dried and cracked hooves on your livestock project. Hooves are made of keratin the same protein that is in our fingernails and toenails. In hot and dry conditions, hooves lacking adequate moisture can begin to crack and split. This cracking and splitting can lead to an open invitation to infections in the hoof and foot. It can also create soreness as the hoof becomes tender. You can use hoof conditioners to treat the dry hooves or you can simply create a little mud. I like to overflow stock tanks and create muddy spots animals must stand in to drink. Animals will come to drink several times a day and standing in the mud can act as a natural hoof conditioner and help to maintain moisture in the hoof. The key is to keep the area slightly muddy where it does not dry out, but not so muddy animals sink in above the hoof. Muddy areas should also be areas free of manure. Muddy manure can invite some pretty nasty bacteria, fungi and viruses to hide and wait to attack a healthy foot. 

Veterinarian checking a hoof for infection.

For your swine project, mud is a great skin conditioner, sunscreen and insect repellent. If you have been taught to keep pigs clean and mud will stain white skin, that is correct. But the upside of mud for pigs is it helps lock moisture into their skin. Think about people who go to a spa and get a mud facial. It works the same way for pigs. A layer of mud and the dirt it leaves behind when it dries, is a great sunscreen and insect repellent. It coats the skin and filters sunlight helping prevent sunburns. It also can provide a layer of protection from biting insects like flies.

A pig enjoying a mud wallow.

Mud can be a foe when there is too much. Wet winters can be the worst at making and keeping mud. Low temperatures and a lack of sunlight prevent mud from drying out and it seems like mud never goes away. Even though hooves need moisture, too much can cause hooves to become soft and instead of cracking, they can tear or become sensitive. Softer hooves also allow bacteria, fungi and viruses in the environment to get into the hoof and foot creating infections. 

Excess mud attached to wool and hair adds extra weight on and animal. In the cattle industry, mud attached above the legs on the body is called a tag. Large amounts of tag mud can actually reduce a calf’s rate of gain in a feedlot so think about what it can do to your show project. 

Feeder calves with tag (mud).
Photo Credit: ag.ndsu.edu

Controlling mud is the key to making it your friend and not your foe. Design animal pens where moisture can drain away and allow them to dry out. Provide a dry place for animals to rest out of the mud during wet weather conditions. When it dries out, provide a place for some mud to be created for animals to stand in or for pigs to wallow in. If you can control when and where mud is available, it can be a great help to your livestock projects.

Scott Stinnett

Area Extension Agent

Kit Carson County

Golden Plains Area

Colorado State University Extension

Safe Swine Handling

Handling swine can be a bit of an adventure to a first time pig owner and even a bit challenging for those who have raised pigs for several years. Unlike cattle, pigs cannot be easily worked in alleys and chutes. Even goats and sheep can be controlled by hand easier than a pig. Learning to use a few simple tools can make swine handling easier and most of all safe for pigs and people.

Moving pigs is usually the first task to learn how to perform and can be done easily using some basic tools. First is using a swine board or sometimes called a sorting board. A swine board is made to be tall enough a pig cannot see over it and wide enough to match at least half of a mature pig's body length. It can be made of wood metal or plastic. Swine boards are used as a portable wall. When moving pigs out of a pen or in an alley way, a swine board visibly blocks off a path of travel for a pig. If the pen or alley is wider than one swine board can block adding another person with a swine board is best.

It is best to use the swine board to do one of two things. Swine boards can be carried behind a pig or group of pigs to encourage them to move away from the board and in the direction you want them to travel. Boards can also be used to help stop or turn a pig. By placing a swine board across an alley just past a turn, a pig will naturally walk toward the board, see their path is blocked and usually make the turn you want them to take.

Photo Credit: pork.org

Other tools include a paddle, flag, cane or driving stick. These are similar to a show stick and are used to drive a pig in a direction by either blocking their direction of travel or lightly tapping on the opposite side of the body from the direction you want them to travel. As they learn about these items they can then be used as a visual cue and just placing the item in the pig's vision will cue them to turn away from it and travel in the direction you want them to go.

Photo Credit: grandin.com

When it comes time to restrain a pig to give an injection, draw blood for a vet check, or ear tagging, there are few options. The easiest method is using a snout snare. A snout snare can be either a commercially purchased item or can be homemade. A snout snare works when a pig opens their mouth slightly and the snare is placed around the upper jaw and snout. When it is pulled snug, a pig cannot back out of it and can be secured for tagging, giving an injection or other veterinary procedure. 

At first look, a snout snare appears to be restricting the pigs ability to breath out of their nose. A properly placed snout snare fits under the upper jaw and over the nasal bone and does not block off any of the pigs nose or nasal passages allowing them to breath normally.

Photo Credit: Virginia Tech, OUV

When using a snout snare, time is the key. If you need to snare a pig to give it an injection of medication, get all of your injection supplies ready first. Then snare the pig, give the injection and release the pig. A pig should be in a snare for less than a minute for tagging or injections, but may need to be secured longer for other veterinary procedures. Snares are not hurtful to a pig, but a pig does stress a bit due to being restrained. The less time in the snare, the less stress on the pig.

As with any other animal, slow and quiet handling is best and creates a low stress situation for pigs and people. Pigs are relatively fast learners and adapt quickly to being moved with swine boards and other driving tools. They also learn what a snare is and will avoid them when they have been used multiple times so use snares only when necessary. 

If you have questions about handling pigs or any other animals, contact your local Extension office.

Scott Stinnett

Area Extension Agent

Kit Carson County

Golden Plains Area

Colorado State University Extension

Poultry and Summer Heat

     Poultry can be negatively affected by summer heat. There are several factors that can be controlled to help them remain healthy and productive throughout the summer.

     Poultry need to maintain a constant body temperature. For example, chicken’s body temperature ranges between 105°F and 107°F. Poultry have some basic ways of lowering their body temperature. Panting allows poultry to release water vapor from the lungs helping cool the body. Poultry may also hold their wings out which increases surface area and hep them radiate out heat. You can also provide additional items to help poultry deal with high temperatures.

     Water is the most important item for poultry as it is for any other animal. Water should always be available to prevent dehydration which can occur quickly when poultry are already panting. Cool water is preferred to warm or hot water. Waterers should be kept out of sunlight.

     Feed and the bird digesting it can increase body temperature. Feeding poultry during the cooler parts of the day can help prevent overheating.

     A proper shelter is important too. Providing shade gives poultry relief from direct sunlight. It also provides cooler ground where poultry can rest and lay their body against the cool ground. Be careful how you provide shade. A metal roof may give great shade, but the radiant heat created by the sun on the metal may make the area under the shade warmer than the outside air temperature.

     Ventilation is another important factor for a proper shelter. If the shelter can be aligned to take advantage of summer winds, the natural air flow will help to cool the shelter and the poultry. If natural ventilation is not possible, adding fans to move air through the shelter will prevent the air from becoming stale and hot.

     Providing enough space is another factor. The more birds can spread out, the better they are able to regulate their own body temperature. Birds crowded into a shade may produce more body heat than if they were left out of the shade.

     Poultry kept indoors during the summer are at the greatest risk for overheating. Be sure birds have cool water available, shade, space, ventilation and are fed during cool hours. You may choose to use misting systems to help with cooling or put out frozen water bottles for birds to cool themselves against. As long as poultry, indoors or outdoors, can be provided some basic necessities, they can endure the heat of summer very well.

Scott Stinnett
Area Extension Agent
Kit Carson County
Golden Plains Area
Colorado State University Extension

Halter Breaking New Calves

 It is that time of year again when new show calves are being brought in. No matter if you raised or bought one, halter breaking is one of the biggest task to complete. There are several methods how to accomplish this, but they all have some key things to remember:

• Understand the temperament of the calf. Are they quiet? Are they flighty? Do they want to fight?
• Work slowly and quietly. Loud and fast can start the calf's fight or flight response.
• Teach one thing at a time. Calves think only about one thing at a time. Don't try to much at once.
• Pressure and release. When you ask a calf to take a step, reward them for moving by releasing pressure.
• Be consistent. Don't confuse a calf by trying multiple ways to teach them things. Teach the same way multiple times. 
• Be patient. Calves learn at different speeds. One may start walking on a halter in 3 days, another may take 3 weeks.
• Know when to say when. If a calf stops responding to what you ask, take a break. It can take cattle 30 minutes or more to calm down if they get excited during the breaking process.
• Be Safe. Make sure the area you are working in is safe and you and the calf can work safely.

Morgan Young, Extension Agent in Chaffee County, Colorado has put together a great resource video on halter breaking calves. Here is the link: Halter Breaking Cattle CSU Extension- Morgan Young

Scott Stinnett

Area Extension Agent

Kit Carson County

Golden Plains Area

Colorado State University Extension